Bandit 2019 DRUM STYLE BRUSH BANDIT
Regular Price: $52,328
Intimidator 15XPC 15″ Drum Style Brush Bandit
Good condition Intimidator model drum style brush bandit chipper for sale!
24″ diameter x 18 3/4″ wide chipper drum with (4) 5/8″ x 5 1/2″ x 9″ dual edge knives.
“Drum Shear Bar” spans full width of the drum mounted in the upper portion of the drum housing potentially creating a slicing action of a winch line or climber’s rope.
Patented ‘power slot’ assists in maximizing chip velocity. The power slot also provides a place for fine material to escape that might tend to lie in the belly of the drum.
30 gallon steel fuel tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge.
12 gallon steel hydraulic tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge.
Slide box feed system (includes adjustable spring on each side) with (2) horizontal feed wheels 10 5/8″ diameter x 18 3/4″ wide, driven by (2) 32.3 CID hydraulic motors.
Hydraulic lift cylinder – utilizes a hydraulic cylinder to raise or provide down pressure for the top feed wheel (controlled via a handle located on either side of the infeed hopper).
Bottom feed wheel clean out door (opens via spring latch pin allowing dirt and debris to fall out extending knife and component life).
360 degree HAND crank swivel discharge (height adjustable) with 12″ adjustable chip deflector.
Clean out and inspection door on discharge.
29″ high x 54″ wide tapered infeed hopper with 30″ fold down infeed hopper tray, heavy duty taillight covers, and spring lift assists.
(2) Last chance safety pull cables Control bar – located around top and sides of infeed hopper with 3 control positions (forward/ neutral/ reverse).
Wooden pusher tool with mount on infeed hopper.
3/16″ x 2″ x 4″ rectangular tubing with a 1/4″ x 3″ x 6″ tubular tongue Frame / Fender supports.
Lockable aluminum toolbox.
5/16″ (G70) safety chains with spring loaded latch hooks.
8,000 pound capacity tongue jack with 15″ of travel and foot pad.
12 volt system with rubber mounted LED tail lights, 6 prong replaceable coiled power cord.
& protected heavy-duty wiring with junction box, and LED clearance lights with reflectors.
Banded chipper drive belts (adjustable via a sliding engine system) Pressure check kit – Gauge is NOT included.
Weather resistant manual container.
Engine disable plug for hood locking pin-preventing engine from operating without pin in place.
Safety DVD, (2) 6″ wide x 9″ tall Bandit operator’s manuals (one paper copy and one waterproof copy) and (1) engine operator’s manual.
Spanish & English combination safety decals.
333-28984 Standard Imron Industrial Urethane Green.
1 990-RC1512-094 PSI 4.3L, 145 horsepower gas engine without clutch (Includes 3 year / 3,500 hour engine warranty and spark arrestor muffler).
1 980-6000-40 Murphy PV380 panel with reversing auto feed for PSI 145 horsepower gas engines (Includes 1,000 CCA battery with box) – Panel is mounted on engine shroud with no cover.
1 700-1000-12 NACD Spring Loaded Clutch.
1 OPTION-980-5000-73 Dinamic winch with line docking station and manual push button feed assist (Includes 5/16″ diameter x 200′.
Samson Amsteel blue rope) (Includes (1) manual rear stabilizer).
OPTION-915-5000-07 Double Teeth (Bottom Feed Wheel) (15″ drums/ 250).
Single 8,000 pound Torflex axle with electric brakes (0 degree down trail) (Will be 4 1/ 2″ shorter than 45 degree down trail).
1 990-100406 (2) 215/75R 17.5″ tires mounted on 8-bolt heavy-duty gray rims (8,000 pound axles on up).
1 990-100415 Aluminum bolt on fenders (Approximately 1/8″ thick).
1 990-100274 2-1/2″ Wallace Forge Pintle Hitch.
1 OPTION-905-5000-15 Option 7 Prong (Flat/RV Style) to 6 Prong Coiled Cord.
View all available chippers here.
DOGFACE HEAVY EQUIPMENT
Located in Salt Lake City, Utah, can help you locate or sell used construction equipment from all over the Intermountain West. Search our inventory for used excavators, backhoe loaders, crawler dozers, motor graders, 4WD loaders, forklifts, and other heavy equipment. Tom Ramsey has over three decades experience buying and selling heavy equipment. We pride ourselves on offering an extensive inventory across all heavy equipment categories to meet your specific needs.
Call or text dogface equipment at: (801-580-1159)
